Save 20% or More on Water and Wastewater Costs
Challenges
Companies are paying for unnecessary air because water meters measure volume. A water meter does not distinguish between the volume caused by air or water.
Air enters pipelines because a utility company pumps air to push water from their plant to water users. A utility company adds air to increase water pressure. Water surges may occur through aging fixtures, causing leaks through gaskets and seals. The high water pressure and surges result in turbulence and over consumption of water.
A paddle in a water meter spins to measure air and water. A surge results from the opening and closing of fixtures, fluctuations in water pressure, and flow variability. A surge causes over-spinning of a paddle, which increases the meter reading and wasted water and wastewater costs. In addition, when conditions occur outside of the water pressure range and water is turbulent, water paddles over-spin. Research shows that most water meters are old, inaccurate, and function within a limited range of water pressure and flow.
Air also enters pipelines through cracks, supply interruptions, and breakages.
The pipelines contain air to avoid air block and hammering complications. The amount of air can vary throughout a day and night. Some factors include the specific type and condition of the water supply system, water pressure, and temperature.
Solution
We offer precision-engineered technology that results in water meters that are more efficient, accurate, and lowers bills.
The flow management devices:
Guaranteed Cost Savings of 20%
Savings occur immediately after installation.
Cost savings depend on the amount of air within pipelines at a specific time, the water pressure, flow rate, and capacity of the pipelines.
Facilities located far from a water pumping plant have experienced cost savings of 35%.
Premier Quality Technology
Designed and Made with US-sourced Metal
The technology is constructed of US-sourced stainless steel, titanium, and copper by a manufacturer with expertise in fluid dynamics and mechanical engineering. They collaborated with leaders in the oil and gas industry to design durable devices.
The flow management devices are manufactured in the US with materials approved by the National Sanitation Foundation (NSF). They are safe for contact with potable water.
They work with single jet, multi-jet, and turbine category positive displacement water meters.
The variable spring-loaded plunger regulates water pressure and slows down the spinning of a paddle in a water meter.
The patent-pending devices have a 10-year warranty. The manufacturer will replace a device, if needed, during the warranty period, at no expense.
Water pressure may decrease insignificantly with the device (1 to 4% at 65 pounds per square inch or below).
Facilities
Many facilities can benefit from this technology, including:
Limited Time Offer
90-day free trial, including installation.
Action Steps
1. Please submit water and wastewater billing statements covering the past year.
2. We'll email you a proposal.
The cost of the technology is a share of the savings.
3. Upon approval, we'll schedule a licensed and bonded plumbing company to install the device.
A licensed plumbing company will:
No permits are needed because the device will be installed on the facility's property.
The plumbing company is required to follow municipal laws, codes, and professional practices.
Water devices would not be used on pipelines for fire-fighting water.
Depending on the location and condition of the pipe, the time for installation is a few minutes to an hour and half.
The installation could occur during the day or night.
During installation, water supply will be maintained for healthcare and others who need continuous water access. Water trucks can provide water.
Referral Program
If you refer clients, we'll donate to a 501(c)(3) non-profit in honor of your name (or anonymously) or give you a gift.
Thank you!
Challenges
Companies are paying for unnecessary air because water meters measure volume. A water meter does not distinguish between the volume caused by air or water.
Air enters pipelines because a utility company pumps air to push water from their plant to water users. A utility company adds air to increase water pressure. Water surges may occur through aging fixtures, causing leaks through gaskets and seals. The high water pressure and surges result in turbulence and over consumption of water.
A paddle in a water meter spins to measure air and water. A surge results from the opening and closing of fixtures, fluctuations in water pressure, and flow variability. A surge causes over-spinning of a paddle, which increases the meter reading and wasted water and wastewater costs. In addition, when conditions occur outside of the water pressure range and water is turbulent, water paddles over-spin. Research shows that most water meters are old, inaccurate, and function within a limited range of water pressure and flow.
Air also enters pipelines through cracks, supply interruptions, and breakages.
The pipelines contain air to avoid air block and hammering complications. The amount of air can vary throughout a day and night. Some factors include the specific type and condition of the water supply system, water pressure, and temperature.
Solution
We offer precision-engineered technology that results in water meters that are more efficient, accurate, and lowers bills.
The flow management devices:
- decrease excess water flow
- compress air before it reaches the water meter
- change turbulent flow to smooth flow (laminar)
- reverse air flow so that the meter is more accurate
- control water flow at the main water portal
- eliminate surges and pressure peaks
- protect plumbing from fluctuations
- serve as a check valve to keep water from returning to the main water portal
- enhance the flow for the water pressure it was designed for
- are adjustable and can be customized
Guaranteed Cost Savings of 20%
Savings occur immediately after installation.
Cost savings depend on the amount of air within pipelines at a specific time, the water pressure, flow rate, and capacity of the pipelines.
Facilities located far from a water pumping plant have experienced cost savings of 35%.
Premier Quality Technology
Designed and Made with US-sourced Metal
The technology is constructed of US-sourced stainless steel, titanium, and copper by a manufacturer with expertise in fluid dynamics and mechanical engineering. They collaborated with leaders in the oil and gas industry to design durable devices.
The flow management devices are manufactured in the US with materials approved by the National Sanitation Foundation (NSF). They are safe for contact with potable water.
They work with single jet, multi-jet, and turbine category positive displacement water meters.
The variable spring-loaded plunger regulates water pressure and slows down the spinning of a paddle in a water meter.
The patent-pending devices have a 10-year warranty. The manufacturer will replace a device, if needed, during the warranty period, at no expense.
Water pressure may decrease insignificantly with the device (1 to 4% at 65 pounds per square inch or below).
Facilities
Many facilities can benefit from this technology, including:
- Golf courses, resorts and hotels
- High tech, data centers, cloud centers
- Sports fields, stadiums, parks
- Universities and colleges
- Energy and manufacturing companies
- Business campuses
- Food and beverage manufacturers
- Car Washes
- Airports
- Cemeteries
- Hospitals
Limited Time Offer
90-day free trial, including installation.
Action Steps
1. Please submit water and wastewater billing statements covering the past year.
2. We'll email you a proposal.
The cost of the technology is a share of the savings.
3. Upon approval, we'll schedule a licensed and bonded plumbing company to install the device.
A licensed plumbing company will:
- check the water pressure of your pipeline
- temporarily turn off the water to your facility
- uncouple a pipe fitting on the property side of the water meter
- place the device inside the pipe
- fasten the fitting around the pipe
- turn on the water
- check the water pressure and proper functioning of the device
No permits are needed because the device will be installed on the facility's property.
The plumbing company is required to follow municipal laws, codes, and professional practices.
Water devices would not be used on pipelines for fire-fighting water.
Depending on the location and condition of the pipe, the time for installation is a few minutes to an hour and half.
The installation could occur during the day or night.
During installation, water supply will be maintained for healthcare and others who need continuous water access. Water trucks can provide water.
Referral Program
If you refer clients, we'll donate to a 501(c)(3) non-profit in honor of your name (or anonymously) or give you a gift.
Thank you!